Technical Articles

FAQ - Why do I get very little pressure at my fixtures when I turn on the hot water?

This could be that the incorrect size tankless unit was installed for your application. Tankless water heaters are installed based upon the peak demand in an application. Also you will get less hot water flow in the winter than in the summer, due to the reduced inlet water temperature. When sizing a tankless water heater use the worst case temperature rise for your region along with peak demand.
 
A local Noritz service  representative can be located at:  http://support.noritz.com/servicereplocator.php

Applicable Models
  • Models: ALL MODELS
Attachments
There are no attachments for this article.
Comments Comments
Please add a comment if you would like to provide us with feedback about this article. We will carefully analyze your feedback and use it to improve our Articles, but we will not reply to you. If you have an issue that requires a reply, please click here to contact us. If you have an urgent matter that needs immediate assistance, please call us at 866-766-7489. Otherwise, please feel free to search our website for what you need. Thank you for choosing Noritz!

Related Articles

There are no articles in this section.

Articles in same category

FAQ - What does a 29 error code mean?
Viewed 47916 times since Fri, Dec 16, 2011
FAQ - Why can’t I raise the temperature above 120°F?
Viewed 6184 times since Fri, Sep 30, 2011
FAQ - My heater shuts off while I am in the shower or using the sink in the kitchen, why? There are no error codes on my remote.
Viewed 44473 times since Mon, Oct 3, 2011
Article Rating (3 Votes)
Rate this article

Subscribe to Knowledgebase

Get notified when Knowledgebase articles are added or updated.
Get notified when Knowledgebase articles are added or updated.
Subscribe
VIEW FULL SITE
Copyright © 2011, NORITZ AMERICA CORP.All Rights Reserved